54 lines
26 KiB
Plaintext
54 lines
26 KiB
Plaintext
{ "Warning" "WQCU_PARALLEL_USER_SHOULD_SPECIFY_NUM_PROC" "" "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." { } { } 0 18236 "Number of processors has not been specified which may cause overloading on shared machines. Set the global assignment NUM_PARALLEL_PROCESSORS in your QSF to an appropriate value for best performance." 0 0 "Fitter" 0 -1 1615517011405 ""}
|
|
{ "Info" "IQCU_PARALLEL_AUTODETECT_MULTIPLE_PROCESSORS" "8 8 " "Parallel compilation is enabled and will use 8 of the 8 processors detected" { } { } 0 20030 "Parallel compilation is enabled and will use %1!i! of the %2!i! processors detected" 0 0 "Fitter" 0 -1 1615517011405 ""}
|
|
{ "Info" "IMPP_MPP_USER_DEVICE" "Part3 10M50DAF484C7G " "Selected device 10M50DAF484C7G for design \"Part3\"" { } { } 0 119006 "Selected device %2!s! for design \"%1!s!\"" 0 0 "Fitter" 0 -1 1615517011415 ""}
|
|
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Low junction temperature is 0 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1615517011455 ""}
|
|
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "High junction temperature is 85 degrees C" { } { } 0 21077 "%1!s! is %2!s!" 0 0 "Fitter" 0 -1 1615517011455 ""}
|
|
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" { } { } 0 171003 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "Fitter" 0 -1 1615517011685 ""}
|
|
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Feature LogicLock is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." { } { } 0 292013 "Feature %1!s! is only available with a valid subscription license. You can purchase a software subscription to gain full access to this feature." 0 0 "Fitter" 0 -1 1615517011685 ""}
|
|
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M08DAF484I7G " "Device 10M08DAF484I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M16DAF484C7G " "Device 10M16DAF484C7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M16DAF484I7G " "Device 10M16DAF484I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M25DAF484C7G " "Device 10M25DAF484C7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M25DAF484I7G " "Device 10M25DAF484I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M50DAF484I7G " "Device 10M50DAF484I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M50DAF484I7P " "Device 10M50DAF484I7P is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M40DAF484C7G " "Device 10M40DAF484C7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "10M40DAF484I7G " "Device 10M40DAF484I7G is compatible" { } { } 2 176445 "Device %1!s! is compatible" 0 0 "Design Software" 0 -1 1615517011795 ""} } { } 2 176444 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "Fitter" 0 -1 1615517011795 ""}
|
|
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "8 " "Fitter converted 8 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TMS~ H2 " "Pin ~ALTERA_TMS~ is reserved at location H2" { } { { "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_TMS~ } } } { "temporary_test_loc" "" { Generic "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/" { { 0 { 0 ""} 0 56 14176 15139 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TCK~ G2 " "Pin ~ALTERA_TCK~ is reserved at location G2" { } { { "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_TCK~ } } } { "temporary_test_loc" "" { Generic "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/" { { 0 { 0 ""} 0 58 14176 15139 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDI~ L4 " "Pin ~ALTERA_TDI~ is reserved at location L4" { } { { "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_TDI~ } } } { "temporary_test_loc" "" { Generic "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/" { { 0 { 0 ""} 0 60 14176 15139 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_TDO~ M5 " "Pin ~ALTERA_TDO~ is reserved at location M5" { } { { "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_TDO~ } } } { "temporary_test_loc" "" { Generic "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/" { { 0 { 0 ""} 0 62 14176 15139 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONFIG_SEL~ H10 " "Pin ~ALTERA_CONFIG_SEL~ is reserved at location H10" { } { { "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_CONFIG_SEL~ } } } { "temporary_test_loc" "" { Generic "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/" { { 0 { 0 ""} 0 64 14176 15139 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nCONFIG~ H9 " "Pin ~ALTERA_nCONFIG~ is reserved at location H9" { } { { "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_nCONFIG~ } } } { "temporary_test_loc" "" { Generic "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/" { { 0 { 0 ""} 0 66 14176 15139 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_nSTATUS~ G9 " "Pin ~ALTERA_nSTATUS~ is reserved at location G9" { } { { "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_nSTATUS~ } } } { "temporary_test_loc" "" { Generic "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/" { { 0 { 0 ""} 0 68 14176 15139 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1615517011795 ""} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ALTERA_CONF_DONE~ F8 " "Pin ~ALTERA_CONF_DONE~ is reserved at location F8" { } { { "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" "" { PinPlanner "c:/intelfpga_lite/16.1/quartus/bin64/pin_planner.ppl" { ~ALTERA_CONF_DONE~ } } } { "temporary_test_loc" "" { Generic "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/" { { 0 { 0 ""} 0 70 14176 15139 0 0 "" 0 "" "" } } } } } 0 169125 "Pin %1!s! is reserved at location %2!s!" 0 0 "Design Software" 0 -1 1615517011795 ""} } { } 0 169124 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "Fitter" 0 -1 1615517011795 ""}
|
|
{ "Info" "IFIOMGR_RESERVE_PIN_NO_DATA0" "" "DATA\[0\] dual-purpose pin not reserved" { } { } 0 169141 "DATA\[0\] dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1615517011795 ""}
|
|
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "Data\[1\]/ASDO " "Data\[1\]/ASDO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1615517011795 ""}
|
|
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "nCSO " "nCSO dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1615517011795 ""}
|
|
{ "Info" "IFIOMGR_PIN_NOT_RESERVE" "DCLK " "DCLK dual-purpose pin not reserved" { } { } 0 12825 "%1!s! dual-purpose pin not reserved" 0 0 "Fitter" 0 -1 1615517011795 ""}
|
|
{ "Warning" "WCUT_CUT_ATOM_PINS_WITH_INCOMPLETE_IO_ASSIGNMENTS" "" "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" { } { } 0 15714 "Some pins have incomplete I/O assignments. Refer to the I/O Assignment Warnings report for details" 0 0 "Fitter" 0 -1 1615517011795 ""}
|
|
{ "Critical Warning" "WFIOMGR_PINS_MISSING_LOCATION_INFO" "20 20 " "No exact pin location assignment(s) for 20 pins of 20 total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." { } { } 1 169085 "No exact pin location assignment(s) for %1!d! pins of %2!d! total pins. For the list of pins please refer to the I/O Assignment Warnings table in the fitter report." 0 0 "Fitter" 0 -1 1615517012035 ""}
|
|
{ "Critical Warning" "WSTA_SDC_NOT_FOUND" "Part3.sdc " "Synopsys Design Constraints File file not found: 'Part3.sdc'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." { } { } 1 332012 "Synopsys Design Constraints File file not found: '%1!s!'. A Synopsys Design Constraints File is required by the TimeQuest Timing Analyzer to get proper timing constraints. Without it, the Compiler will not properly optimize the design." 0 0 "Fitter" 0 -1 1615517012245 ""}
|
|
{ "Info" "ISTA_NO_CLOCK_FOUND_NO_DERIVING_MSG" "base clocks " "No user constrained base clocks found in the design" { } { } 0 332144 "No user constrained %1!s! found in the design" 0 0 "Fitter" 0 -1 1615517012245 ""}
|
|
{ "Info" "ISTA_DERIVE_CLOCKS_FOUND_NO_CLOCKS" "" "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." { } { } 0 332096 "The command derive_clocks did not find any clocks to derive. No clocks were created or changed." 0 0 "Fitter" 0 -1 1615517012245 ""}
|
|
{ "Warning" "WSTA_NO_CLOCKS_DEFINED" "" "No clocks defined in design." { } { } 0 332068 "No clocks defined in design." 0 0 "Fitter" 0 -1 1615517012245 ""}
|
|
{ "Info" "ISTA_NO_CLOCK_UNCERTAINTY_FOUND_DERIVING" "\"derive_clock_uncertainty\" " "No user constrained clock uncertainty found in the design. Calling \"derive_clock_uncertainty\"" { } { } 0 332143 "No user constrained clock uncertainty found in the design. Calling %1!s!" 0 0 "Fitter" 0 -1 1615517012245 ""}
|
|
{ "Info" "ISTA_NO_UNCERTAINTY_FOUND" "" "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." { } { } 0 332154 "The derive_clock_uncertainty command did not apply clock uncertainty to any clock-to-clock transfers." 0 0 "Fitter" 0 -1 1615517012245 ""}
|
|
{ "Info" "ISTA_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." { } { } 0 332130 "Timing requirements not specified -- quality metrics such as performance may be sacrificed to reduce compilation time." 0 0 "Fitter" 0 -1 1615517012245 ""}
|
|
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_START_REGPACKING_INFO" "" "Starting register packing" { } { } 0 176233 "Starting register packing" 0 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_START_REG_LOCATION_PROCESSING" "" "Performing register packing on registers with non-logic cell location assignments" { } { } 1 176273 "Performing register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_FINISH_REG_LOCATION_PROCESSING" "" "Completed register packing on registers with non-logic cell location assignments" { } { } 1 176274 "Completed register packing on registers with non-logic cell location assignments" 1 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_BEGIN_FAST_REGISTER_INFO" "" "Started Fast Input/Output/OE register processing" { } { } 1 176236 "Started Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_FAST_REGISTER_INFO" "" "Finished Fast Input/Output/OE register processing" { } { } 1 176237 "Finished Fast Input/Output/OE register processing" 1 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_START_MAC_SCAN_CHAIN_INFERENCING" "" "Start inferring scan chains for DSP blocks" { } { } 1 176238 "Start inferring scan chains for DSP blocks" 1 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_FINISH_MAC_SCAN_CHAIN_INFERENCING" "" "Inferring scan chains for DSP blocks is complete" { } { } 1 176239 "Inferring scan chains for DSP blocks is complete" 1 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_START_IO_MULT_RAM_PACKING" "" "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" { } { } 1 176248 "Moving registers into I/O cells, Multiplier Blocks, and RAM blocks to improve timing and density" 1 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Extra Info" "IFSAC_FSAC_FINISH_IO_MULT_RAM_PACKING" "" "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" { } { } 1 176249 "Finished moving registers into I/O cells, Multiplier Blocks, and RAM blocks" 1 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Info" "IFSAC_FSAC_REGISTER_PACKING_FINISH_REGPACKING_INFO" "" "Finished register packing" { { "Extra Info" "IFSAC_NO_REGISTERS_WERE_PACKED" "" "No registers were packed into other blocks" { } { } 1 176219 "No registers were packed into other blocks" 0 0 "Design Software" 0 -1 1615517012255 ""} } { } 0 176235 "Finished register packing" 0 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement " "Statistics of I/O pins that need to be placed that use the same VCCIO and VREF, before I/O pin placement" { { "Info" "IFSAC_FSAC_SINGLE_IOC_GROUP_STATISTICS" "20 unused 2.5V 10 10 0 " "Number of I/O pins in group: 20 (unused VREF, 2.5V VCCIO, 10 input, 10 output, 0 bidirectional)" { { "Info" "IFSAC_FSAC_IO_STDS_IN_IOC_GROUP" "2.5 V. " "I/O standards used: 2.5 V." { } { } 0 176212 "I/O standards used: %1!s!" 0 0 "Design Software" 0 -1 1615517012255 ""} } { } 0 176211 "Number of I/O pins in group: %1!d! (%2!s! VREF, %3!s! VCCIO, %4!d! input, %5!d! output, %6!d! bidirectional)" 0 0 "Design Software" 0 -1 1615517012255 ""} } { } 0 176214 "Statistics of %1!s!" 0 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Info" "IFSAC_FSAC_IO_STATS_BEFORE_AFTER_PLACEMENT" "before " "I/O bank details before I/O pin placement" { { "Info" "IFSAC_FSAC_IO_BANK_PIN_GROUP_STATISTICS" "I/O banks " "Statistics of I/O banks" { { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1A does not use undetermined 0 16 " "I/O bank number 1A does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 16 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1615517012255 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "1B does not use undetermined 4 20 " "I/O bank number 1B does not use VREF pins and has undetermined VCCIO pins. 4 total pin(s) used -- 20 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1615517012255 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "2 does not use undetermined 0 36 " "I/O bank number 2 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 36 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1615517012255 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "3 does not use undetermined 0 48 " "I/O bank number 3 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 48 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1615517012255 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "4 does not use undetermined 0 48 " "I/O bank number 4 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 48 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1615517012255 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "5 does not use undetermined 0 40 " "I/O bank number 5 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 40 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1615517012255 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "6 does not use undetermined 0 60 " "I/O bank number 6 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 60 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1615517012255 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "7 does not use undetermined 0 52 " "I/O bank number 7 does not use VREF pins and has undetermined VCCIO pins. 0 total pin(s) used -- 52 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1615517012255 ""} { "Info" "IFSAC_FSAC_SINGLE_IO_BANK_STATISTICS" "8 does not use undetermined 4 32 " "I/O bank number 8 does not use VREF pins and has undetermined VCCIO pins. 4 total pin(s) used -- 32 pins available" { } { } 0 176213 "I/O bank number %1!s! %2!s! VREF pins and has %3!s! VCCIO pins. %4!d! total pin(s) used -- %5!d! pins available" 0 0 "Design Software" 0 -1 1615517012255 ""} } { } 0 176214 "Statistics of %1!s!" 0 0 "Design Software" 0 -1 1615517012255 ""} } { } 0 176215 "I/O bank details %1!s! I/O pin placement" 0 0 "Fitter" 0 -1 1615517012255 ""}
|
|
{ "Info" "IFITCC_FITTER_PREPARATION_END" "00:00:01 " "Fitter preparation operations ending: elapsed time is 00:00:01" { } { } 0 171121 "Fitter preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1615517012285 ""}
|
|
{ "Info" "IVPR20K_VPR_FAMILY_APL_ERROR" "" "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." { } { } 0 14896 "Fitter has disabled Advanced Physical Optimization because it is not supported for the current family." 0 0 "Fitter" 0 -1 1615517012285 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_START" "" "Fitter placement preparation operations beginning" { } { } 0 170189 "Fitter placement preparation operations beginning" 0 0 "Fitter" 0 -1 1615517013445 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_PREP_END" "00:00:00 " "Fitter placement preparation operations ending: elapsed time is 00:00:00" { } { } 0 170190 "Fitter placement preparation operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1615517013495 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_START" "" "Fitter placement operations beginning" { } { } 0 170191 "Fitter placement operations beginning" 0 0 "Fitter" 0 -1 1615517013525 ""}
|
|
{ "Info" "IFITAPI_FITAPI_INFO_VPR_PLACEMENT_FINISH" "" "Fitter placement was successful" { } { } 0 170137 "Fitter placement was successful" 0 0 "Fitter" 0 -1 1615517013915 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_PLACEMENT_END" "00:00:00 " "Fitter placement operations ending: elapsed time is 00:00:00" { } { } 0 170192 "Fitter placement operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1615517013915 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_START" "" "Fitter routing operations beginning" { } { } 0 170193 "Fitter routing operations beginning" 0 0 "Fitter" 0 -1 1615517014375 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_PERCENT_ROUTING_RESOURCE_USAGE" "0 " "Router estimated average interconnect usage is 0% of the available device resources" { { "Info" "IFITAPI_FITAPI_VPR_PEAK_ROUTING_REGION" "0 X45_Y44 X55_Y54 " "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X45_Y44 to location X55_Y54" { } { { "loc" "" { Generic "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/" { { 1 { 0 "Router estimated peak interconnect usage is 0% of the available device resources in the region that extends from location X45_Y44 to location X55_Y54"} { { 12 { 0 ""} 45 44 11 11 } } } } } } } 0 170196 "Router estimated peak interconnect usage is %1!d!%% of the available device resources in the region that extends from location %2!s! to location %3!s!" 0 0 "Design Software" 0 -1 1615517015785 ""} } { } 0 170195 "Router estimated average interconnect usage is %1!d!%% of the available device resources" 0 0 "Fitter" 0 -1 1615517015785 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED" "" "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." { { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_ROUTABILITY" "" "Optimizations that may affect the design's routability were skipped" { } { } 0 170201 "Optimizations that may affect the design's routability were skipped" 0 0 "Design Software" 0 -1 1615517015885 ""} { "Info" "IFITAPI_FITAPI_VPR_AUTO_FIT_ENABLED_AND_USED_FOR_TIMING" "" "Optimizations that may affect the design's timing were skipped" { } { } 0 170200 "Optimizations that may affect the design's timing were skipped" 0 0 "Design Software" 0 -1 1615517015885 ""} } { } 0 170199 "The Fitter performed an Auto Fit compilation. Optimizations were skipped to reduce compilation time." 0 0 "Fitter" 0 -1 1615517015885 ""}
|
|
{ "Info" "IFITAPI_FITAPI_VPR_FITTER_ROUTING_END" "00:00:00 " "Fitter routing operations ending: elapsed time is 00:00:00" { } { } 0 170194 "Fitter routing operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1615517015885 ""}
|
|
{ "Info" "IVPR20K_VPR_TIMING_ANALYSIS_TIME" "the Fitter 0.03 " "Total time spent on timing analysis during the Fitter is 0.03 seconds." { } { } 0 11888 "Total time spent on timing analysis during %1!s! is %2!s! seconds." 0 0 "Fitter" 0 -1 1615517016106 ""}
|
|
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1615517016112 ""}
|
|
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1615517016353 ""}
|
|
{ "Info" "ITAPI_TAPI_STARTED" "" "Started post-fitting delay annotation" { } { } 0 334003 "Started post-fitting delay annotation" 0 0 "Fitter" 0 -1 1615517016353 ""}
|
|
{ "Info" "ITAPI_TAPI_COMPLETED" "" "Delay annotation completed successfully" { } { } 0 334004 "Delay annotation completed successfully" 0 0 "Fitter" 0 -1 1615517016703 ""}
|
|
{ "Info" "IFITCC_FITTER_POST_OPERATION_END" "00:00:01 " "Fitter post-fit operations ending: elapsed time is 00:00:01" { } { } 0 11218 "Fitter post-fit operations ending: elapsed time is %1!s!" 0 0 "Fitter" 0 -1 1615517017193 ""}
|
|
{ "Info" "IRDB_WROTE_SUPPRESSED_MSGS" "C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/output_files/Part3.fit.smsg " "Generated suppressed messages file C:/Users/anw0044/Desktop/Noah Woodlee/LAB1/Part3/output_files/Part3.fit.smsg" { } { } 0 144001 "Generated suppressed messages file %1!s!" 0 0 "Fitter" 0 -1 1615517017473 ""}
|
|
{ "Info" "IQEXE_ERROR_COUNT" "Fitter 0 s 6 s Quartus Prime " "Quartus Prime Fitter was successful. 0 errors, 6 warnings" { { "Info" "IQEXE_END_PEAK_VSIZE_MEMORY" "5904 " "Peak virtual memory: 5904 megabytes" { } { } 0 0 "Peak virtual memory: %1!s! megabytes" 0 0 "Design Software" 0 -1 1615517017983 ""} { "Info" "IQEXE_END_BANNER_TIME" "Thu Mar 11 20:43:37 2021 " "Processing ended: Thu Mar 11 20:43:37 2021" { } { } 0 0 "Processing ended: %1!s!" 0 0 "Design Software" 0 -1 1615517017983 ""} { "Info" "IQEXE_ELAPSED_TIME" "00:00:07 " "Elapsed time: 00:00:07" { } { } 0 0 "Elapsed time: %1!s!" 0 0 "Design Software" 0 -1 1615517017983 ""} { "Info" "IQEXE_ELAPSED_CPU_TIME" "00:00:11 " "Total CPU time (on all processors): 00:00:11" { } { } 0 0 "Total CPU time (on all processors): %1!s!" 0 0 "Design Software" 0 -1 1615517017983 ""} } { } 0 0 "%6!s! %1!s! was successful. %2!d! error%3!s!, %4!d! warning%5!s!" 0 0 "Fitter" 0 -1 1615517017983 ""}
|